Standard and Customizable Leak, Flow, Pressure, and Vacuum Test Instrumentation
快速邮件
询价
主页 » 泄漏测试仪器 » 标准漏孔标定 » 示踪气体标准漏孔 » Capillary “Sniffer” Model (CPS)

Capillary “Sniffer” Model (CPS)

[Capillary “Sniffer” Model (CPS)]

* CTS Will follow-up with you on your final quote.

询价选项:

客户可以从限制在小于600psig的气源重新填充泄漏标准。（提供可变利率模式或开放式的可能性）:  是 ()    进气口配件
(不需要具有气缸的标准漏孔型号): 
  
进气口配件
(其他请说明): 		    出气口配件（“嗅探器”类型应用不需要。其他指定检漏仪制造商和型号）: 
  
出气口配件（其他请说明）:     气体类型: 
  
气体类型
(其他请说明): 		    泄漏率: 
  
泄漏率:     测试压力和单位: 
  
测试压力和单位
(如果适用): 		    体积流量单位: 
  
以下哪一项最能描述您的预期应用？: 
  
数量:
大量订购: 1

The CPS model calibrated leak standard is available for several different gas types and mixes. This model was developed to accurately calibrate “Sniffer” type leak detectors. This type of leak detector samples from atmospheric conditions via a “Sniffer Probe” Assembly. Calibrated leak standards with shut-off valves should not be used to calibrate a “Sniffer Type” leak detector. This model is available in leak rates ranging from 10-5 to 10-2 atm-cc/s (Other rates available upon request).

Features:

  • Pin-point gas source that introduces tracer gas without “dead volumes” where gases can accumulate and cause inaccurate, inconsistent readings on a leak detector.
  • Accepts a variety of “Sniffer Probes” from various manufactures
  • Unbreakable stainless steel crimped capillary type leak element
  • All welded stainless steel construction
  • Very low temperature coefficient of 0.2%/°C

This model is available with various sizes of DOT rated gas reservoirs, the reservoir size is usually dictated by the leak rate to insure an acceptable yearly depletion rate.